Tutorials
　 　 　
2. Customizing Profiles

　




(1)Main function of the provided profiles are to adjust the Volume according to the types of mobile phones. If you wish to add setup information and to omit chords, you will need to create and make changes to profiles.

(2)If you wish to add setup information and to edit MIDI files automatically, you will have to use the file named [edit_list_xxx.CSV].
For example, if you wish to set "BankSelect MSB = 124"and "BankSelect LSB = 16" at the first beat of the first bar, you will have to create CSV file that has following content.
Save the file as [edit_list_ADDSETUPINFO.csv], or something that is  easy to recognize. 
Make sure that the file name starts with [edit_list].




(3)Put the file you have created  into the  type-classified folder. 




(4)If you wish to make several arrangements  at the same time, you will need to enter text for those oprations at the end of the [edit_list_xxxx.csv].
For example, if you wish the operation replacing CuePoint with Marker to be performed at the same time as adding BankSelect, you will have to enter text in CSV file as show below.




(5)Put MIDI files into the folder and drop the folder onto Ringtone's desktop icon. Then click on the [Run] button.
Note1: If you drop [edit_list_AddBankSelect.csv] file first then drop [edit_list_ConvCuepointToMarker.csv] file, only the [edit_list_ConvCuepointToMarker.csv] will be active.
If you wish to perform several operations at the same time, make sure that you enter all operations in one particular file.
Note2: All the above scripts are to be performed in the [edit_list_XXX.csv] file. If you make changes to files such as [volume_list], Ringtone may not work properly.
Note3: Check if  the dialog that says "Mistakes found in the edit file" is displayed or not.